Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Lexus LC 500hFACTORY OEM SERVICE PROCEDURE
Engine Control System - Diagnostic Codes (8 Of 9)
- SFI System
- DTC P1450-11: Fuel Tank Pressure Sensor Circuit Short to Ground; DTC P1450-15: Fuel Tank Pressure Sensor Circuit Short to Battery or Open; DTC P1450-2A: Fuel Tank Pressure Sensor Signal Stuck in Range; DTC P1450-2F: Fuel Tank Pressure Sensor Signal Erratic [01/2017 - ]
- DTC P2100-14: Throttle Actuator "A" Control Motor Circuit Short to Ground or Open; DTC P2100-15: Throttle Actuator "A" Control Motor Circuit Short to Battery or Open [01/2017 - 04/2020]
- DTC P2100-18: Throttle Actuator "A" Control Motor Circuit Current Below Threshold; DTC P2100-19: Throttle Actuator "A" Control Motor Circuit Current Above Threshold [04/2020 - ]
- DTC P2109-00: Throttle/Pedal Position Sensor "A" Minimum Stop Performance [01/2017 - ]
- DTC P2111-72: Throttle Actuator "A" Control System Actuator Stuck Open; DTC P2111-73: Throttle Actuator "A" Control System Actuator Stuck Closed [01/2017 - 04/2020]
- DTC P2111-72: Throttle Actuator "A" Control System Actuator Stuck Open; DTC P2111-73: Throttle Actuator "A" Control System Actuator Stuck Closed [04/2020 - ]
- DTC P2119-00: Throttle Actuator "A" Control Throttle Body Range/Performance; DTC P2119-04: Throttle Actuator "A" Control Throttle Body Range/Performance System Internal Failure; DTC P2119-77: Throttle Actuator "A" Control Throttle Body Range/Performance Commanded Position Not Reachable [01/2017 - 04/2020]
- DTC P2119-00: Throttle Actuator "A" Control Throttle Body Range/Performance; DTC P2119-04: Throttle Actuator "A" Control Throttle Body Range/Performance System Internal Failure; DTC P2119-77: Throttle Actuator "A" Control Throttle Body Range/Performance Commanded Position Not Reachable [04/2020 - ]
- DTC P2135-2B: Throttle/Pedal Position Sensor/Switch "A"/"B" Voltage Correlation Signal Cross Coupled [01/2017 - ]
- DTC P2195-19: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 Circuit Current Above Threshold; DTC P2195-24: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 Signal Stuck High; DTC P2196-18: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 Circuit Current Below Threshold; DTC P2196-23: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 Signal Stuck Low; DTC P2197-19: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1 Circuit Current Above Threshold; DTC P2197-24: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1 Signal Stuck High; DTC P2198-18: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 2 Sensor 1 Circuit Current Below Threshold; DTC P2198-23: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 2 Sensor 1 Signal Stuck Low [09/2018 - 04/2020]
- DTC P2195-19: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 Circuit Current Above Threshold; DTC P2195-24: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 Signal Stuck High; DTC P2196-18: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 Circuit Current Below Threshold; DTC P2196-23: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 Signal Stuck Low; DTC P2197-19: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1 Circuit Current Above Threshold; DTC P2197-24: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1 Signal Stuck High; DTC P2198-18: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 2 Sensor 1 Circuit Current Below Threshold; DTC P2198-23: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 2 Sensor 1 Signal Stuck Low [04/2020 - ]
- DTC P2195-1D: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 Circuit Current Out of Range; DTC P2195-23: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 Signal Stuck Low; DTC P2196-1D: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 Circuit Current Out of Range; DTC P2196-24: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 Signal Stuck High; DTC P2197-1D: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1 Circuit Current Out of Range; DTC P2197-23: A/F (O2) Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1 Signal Stuck Low; DTC P2198-1D: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 2 Sensor 1 Circuit Current Out of Range; DTC P2198-24: A/F (O2) Sensor Signal Biased/Stuck Rich Bank 2 Sensor 1 Signal Stuck High [01/2017 - 09/2018]
- DTC P21CF-13: Cylinder 1 Injector "B" Circuit Open; DTC P21D0-13: Cylinder 2 Injector "B" Circuit Open; DTC P21D1-13: Cylinder 3 Injector "B" Circuit Open; DTC P21D2-13: Cylinder 4 Injector "B" Circuit Open; DTC P21D3-13: Cylinder 5 Injector "B" Circuit Open; DTC P21D4-13: Cylinder 6 Injector "B" Circuit Open [01/2017 - ]
- DTC P2226-11: Barometric Pressure Sensor "A" Circuit Short to Ground; DTC P2226-15: Barometric Pressure Sensor "A" Circuit Short to Battery or Open [01/2017 - ]
- DTC P2237-11: A/F (O2) Sensor Positive Current Control Bank 1 Sensor 1 Circuit Short to Ground; DTC P2237-12: A/F (O2) Sensor Positive Current Control Bank 1 Sensor 1 Circuit Short to Battery; DTC P2237-14: A/F (O2) Sensor Positive Current Control Bank 1 Sensor 1 Circuit Short to Ground or Open; DTC P2237-16: A/F (O2) Sensor Positive Current Control Bank 1 Sensor 1 Circuit Voltage Below Threshold; DTC P2237-17: A/F (O2) Sensor Positive Current Control Bank 1 Sensor 1 Circuit Voltage Above Threshold; DTC P2237-1A: A/F (O2) Sensor Positive Current Control Bank 1 Sensor 1 Circuit Resistance Below Threshold; DTC P2240-11: A/F (O2) Sensor Positive Current Control Bank 2 Sensor 1 Circuit Short to Ground; DTC P2240-12: A/F (O2) Sensor Positive Current Control Bank 2 Sensor 1 Circuit Short to Battery; DTC P2240-14: A/F (O2) Sensor Positive Current Control Bank 2 Sensor 1 Circuit Short to Ground or Open; DTC P2240-16: A/F (O2) Sensor Positive Current Control Bank 2 Sensor 1 Circuit Voltage Below Threshold; DTC P2240-17: A/F (O2) Sensor Positive Current Control Bank 2 Sensor 1 Circuit Voltage Above Threshold; DTC P2240-1A: A/F (O2) Sensor Positive Current Control Bank 2 Sensor 1 Circuit Resistance Below Threshold; DTC P2251-11: O2 Sensor Negative Current Control Bank 1 Sensor 1 Circuit Short to Ground; DTC P2251-12: O2 Sensor Negative Current Control Bank 1 Sensor 1 Circuit Short to Battery; DTC P2254-11: O2 Sensor Negative Current Control Bank 2 Sensor 1 Circuit Short to Ground; DTC P2254-12: O2 Sensor Negative Current Control Bank 2 Sensor 1 Circuit Short to Battery [01/2017 - 09/2018]
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.