Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Lexus LC 500hFACTORY OEM SERVICE PROCEDURE
Engine Control System - Diagnostic Codes (4 Of 9)
- SFI System
- DTC P0201-13: Cylinder 1 Injector "A" Circuit Open; DTC P0202-13: Cylinder 2 Injector "A" Circuit Open; DTC P0203-13: Cylinder 3 Injector "A" Circuit Open; DTC P0204-13: Cylinder 4 Injector "A" Circuit Open; DTC P0205-13: Cylinder 5 Injector "A" Circuit Open; DTC P0206-13: Cylinder 6 Injector "A" Circuit Open; DTC P062D-13: Fuel Injector Driver Circuit Performance Bank 1 Circuit Open [01/2017 - ]
- DTC P0220-11: Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Ground [01/2017 - ]
- DTC P0220-15: Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Battery or Open [01/2017 - ]
- DTC P0300-00: Random/Multiple Cylinder Misfire Detected; DTC P0300-27: Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold; DTC P0300-85: Random / Multiple Cylinder Misfire Detected (Over Temperature) Signal Above Allowable Range; DTC P0301-00: Cylinder 1 Misfire Detected; DTC P0302-00: Cylinder 2 Misfire Detected; DTC P0303-00: Cylinder 3 Misfire Detected; DTC P0304-00: Cylinder 4 Misfire Detected; DTC P0305-00: Cylinder 5 Misfire Detected; DTC P0306-00: Cylinder 6 Misfire Detected [01/2017 - 09/2018]
- DTC P0300-00: Random/Multiple Cylinder Misfire Detected; DTC P0300-27: Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold; DTC P0300-85: Random / Multiple Cylinder Misfire Detected (Over Temperature) Signal Above Allowable Range; DTC P0301-00: Cylinder 1 Misfire Detected; DTC P0302-00: Cylinder 2 Misfire Detected; DTC P0303-00: Cylinder 3 Misfire Detected; DTC P0304-00: Cylinder 4 Misfire Detected; DTC P0305-00: Cylinder 5 Misfire Detected; DTC P0306-00: Cylinder 6 Misfire Detected [09/2018 - ]
- DTC P0325-11: Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Ground; DTC P0330-11: Knock Sensor 2 Bank 2 Circuit Short to Ground [01/2017 - ]
- DTC P0325-15: Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Battery or Open; DTC P0330-15: Knock Sensor 2 Bank 2 Circuit Short to Battery or Open [01/2017 - ]
- DTC P0335-11: Crankshaft Position Sensor "A" Circuit Short to Ground; DTC P0335-15: Crankshaft Position Sensor "A" Circuit Short to Battery or Open [01/2017 - ]
- DTC P0335-2A: Crankshaft Position Sensor "A" Signal Stuck in Range; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [01/2017 - ]
- DTC P0340-11: Camshaft Position Sensor "A" Bank 1 or Single Sensor Circuit Short to Ground; DTC P0340-15: Camshaft Position Sensor "A" Bank 1 or Single Sensor Circuit Short to Battery or Open; DTC P0345-11: Camshaft Position Sensor "A" Bank 2 Circuit Short to Ground; DTC P0345-15: Camshaft Position Sensor "A" Bank 2 Circuit Short to Battery or Open [01/2017 - ]
- DTC P0340-2A: Camshaft Position Sensor "A" Bank 1 or Single Sensor Signal Stuck in Range; DTC P0340-31: Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal; DTC P0345-31: Camshaft Position Sensor "A" Bank 2 No Signal [01/2017 - 04/2020]
- DTC P0340-31: Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal; DTC P0345-31: Camshaft Position Sensor "A" Bank 2 No Signal [04/2020 - ]
- DTC P0351-13: Ignition Coil "A" Circuit Open; DTC P0352-13: Ignition Coil "B" Circuit Open; DTC P0353-13: Ignition Coil "C" Circuit Open; DTC P0354-13: Ignition Coil "D" Circuit Open; DTC P0355-13: Ignition Coil "E" Circuit Open; DTC P0356-13: Ignition Coil "F" Circuit Open [01/2017 - ]
- DTC P0365-11: Camshaft Position Sensor "B" Bank 1 Circuit Short to Ground; DTC P0365-15: Camshaft Position Sensor "B" Bank 1 Circuit Short to Battery or Open; DTC P0390-11: Camshaft Position Sensor "B" Bank 2 Circuit Short to Ground; DTC P0390-15: Camshaft Position Sensor "B" Bank 2 Circuit Short to Battery or Open [01/2017 - ]
- DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal; DTC P0390-31: Camshaft Position Sensor "B" Bank 2 No Signal [01/2017 - ]
- DTC P0400-00: Exhaust Gas Recirculation "A" Flow; DTC P0401-9C: Exhaust Gas Recirculation "A" Low / Insufficient Flow; DTC P0402-9B: Exhaust Gas Recirculation "A" High/Excessive Flow [04/2020 - ]
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.