Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Lexus LC 500hFACTORY OEM SERVICE PROCEDURE
Engine Control System - Diagnostic Codes (1 Of 9)
- SFI System
- Vehicle Control History [01/2017 - ]
- DTC P0010-13: A Camshaft Position Actuator Bank 1 Circuit Open; DTC P0020-13: Camshaft Position "A" Actuator Bank 2 Circuit Open [01/2017 - ]
- DTC P0011-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1; DTC P0012-00: Camshaft Position "A" - Timing Over-Retarded Bank 1; DTC P0021-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2; DTC P0022-00: Camshaft Position "A" - Timing Over-Retarded Bank 2 [01/2017 - ]
- DTC P0013-13: Camshaft Position "B" - Actuator Bank 1 Circuit Open; DTC P0023-13: Camshaft Position "B" - Actuator Bank 2 Circuit Open [01/2017 - ]
- DTC P0014-00: Camshaft Position "B" - Timing Over-Advanced or System Performance Bank 1; DTC P0015-00: Camshaft Position "B" - Timing Over-Retarded Bank 1; DTC P0024-00: Camshaft Position "B" - Timing Over-Advanced or System Performance Bank 2; DTC P0025-00: Camshaft Position "B" - Timing Over-Retarded Bank 2 [01/2017 - ]
- DTC P0016-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A; DTC P0018-00: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A [01/2017 - 09/2018]
- DTC P0016-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A; DTC P0018-00: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A [09/2018 - ]
- DTC P0017-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B; DTC P0019-00: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor B [01/2017 - 09/2018]
- DTC P0017-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B; DTC P0019-00: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor B [09/2018 - ]
- DTC P0030-12: HO2S Heater Control Bank 1 Sensor 1 Circuit Short to Battery; DTC P0030-13: HO2S Heater Control Bank 1 Sensor 1 Circuit Open; DTC P0050-12: HO2S Heater Control Bank 2 Sensor 1 Circuit Short to Battery; DTC P0050-13: HO2S Heater Control Bank 2 Sensor 1 Circuit Open; DTC P101A-9E: A/F Sensor Heater Performance Bank 1 Sensor 1 Stuck On; DTC P103A-9E: A/F Sensor Heater Performance Bank 2 Sensor 1 Stuck On [01/2017 - ]
- DTC P0036-12: HO2S Heater Control Circuit Bank 1 Sensor 2 Circuit Short to Battery; DTC P0036-13: A/F (O2) Heater Control Circuit Bank 1 Sensor 2 Circuit Open; DTC P0056-12: HO2S Heater Control Bank 2 Sensor 2 Circuit Short to Battery; DTC P0056-13: A/F (O2) Heater Control Circuit Bank 2 Sensor 2 Circuit Open; DTC P102A-9E: O2 Sensor Heater Performance Bank 1 Sensor 2 Stuck On; DTC P105A-9E: O2 Sensor Heater Performance Bank 2 Sensor 2 Stuck On [01/2017 - ]
- DTC P0069-00: Manifold Absolute Pressure - Barometric Pressure Correlation [01/2017 - ]
- DTC P0087-00: Fuel Rail / System Pressure - Too Low [01/2017 - 09/2018]
- DTC P0087-00: Fuel Rail / System Pressure - Too Low [09/2018 - ]
- DTC P0088-00: Fuel Rail / System Pressure - Too High [01/2017 - 09/2018]
- DTC P0088-00: Fuel Rail / System Pressure - Too High [09/2018 - ]
- DTC P008A-00: Low Pressure Fuel System Pressure - Too Low [01/2017 - 04/2020]
- DTC P008A-00: Low Pressure Fuel System Pressure - Too Low [04/2020 - ]
- DTC P008B-00: Low Pressure Fuel System Pressure - Too High [01/2017 - 04/2020]
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.