Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Lexus GS 300 BaseFACTORY OEM SERVICE PROCEDURE
Engine Control System - Diagnostic Codes (5 Of 5)
- SFI System
- DTC P0100-14: Mass or Volume Air Flow Sensor "A" Circuit Short to Ground or Open; DTC P010016: Mass or Volume Air Flow Sensor "A" Circuit Voltage Below Threshold [10/2015 - ]
- DTC P0100-64: Mass or Volume Air Flow Sensor "A" Signal Plausibility Failure [10/2015 - 09/2016]
- DTC P0100-64: Mass or Volume Air Flow Sensor "A" Signal Plausibility Failure [09/2016 - ]
- DTC P0110-11: Intake Air Temperature Sensor 1 Bank 1 Circuit Short to Ground [10/2015 - ]
- DTC P0110-15: Intake Air Temperature Sensor 1 Bank 1 Circuit Short to Battery or Open [10/2015 - ]
- DTC P0110-2A: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range [10/2015 - ]
- DTC P0115-11: Engine Coolant Temperature Sensor 1 Circuit Short to Ground [10/2015 - 09/2016]
- DTC P0115-11: Engine Coolant Temperature Sensor 1 Circuit Short to Ground [09/2016 - ]
- DTC P0115-15: Engine Coolant Temperature Sensor 1 Circuit Short to Battery or Open [10/2015 - 09/2016]
- DTC P0115-15: Engine Coolant Temperature Sensor 1 Circuit Short to Battery or Open [09/2016 - ]
- DTC P0115-2A: Engine Coolant Temperature Sensor 1 Signal Stuck in Range [10/2015 - 09/2016]
- DTC P0115-2A: Engine Coolant Temperature Sensor 1 Signal Stuck in Range [09/2016 - ]
- DTC P011B-62: Engine Coolant Temperature / Intake Air Temperature Signal Compare Failure [10/2015 - 09/2017]
- DTC P011B-62: Engine Coolant Temperature / Intake Air Temperature Signal Compare Failure [09/2017 - ]
- DTC P0120-11: Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Ground; DTC P012015: Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Battery or Open; DTC P01201C: Throttle / Pedal Position Sensor / Switch "A" Circuit Voltage Out of Range; DTC P022011: Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Ground; DTC P022015: Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Battery or Open; DTC P21352B: Throttle/Pedal Position Sensor/Switch "A"/"B" Voltage Correlation Signal Cross Coupled [10/2015 - ]
- DTC P0125-00: Insufficient Coolant Temperature for Closed Loop Fuel Control [10/2015 - 09/2016]
- DTC P0125-00: Insufficient Coolant Temperature for Closed Loop Fuel Control [09/2016 - ]
- DTC P0128-00: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) [10/2015 - 09/2016]
- DTC P0128-00: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) [09/2016 - ]
- DTC P0136-11: O2 Sensor Circuit Bank 1 Sensor 2 Circuit Short to Ground; DTC P013613: O2 Sensor Circuit Bank 1 Sensor 2 Circuit Open; DTC P013614: O2 Sensor Circuit Bank 1 Sensor 2 Circuit Short to Ground or Open; DTC P013615: O2 Sensor Circuit Bank 1 Sensor 2 Circuit Short to Battery or Open; DTC P013617: O2 Sensor Circuit Bank 1 Sensor 2 Circuit Voltage Above Threshold; DTC P013623: O2 Sensor Circuit Bank 1 Sensor 2 Signal Stuck Low; DTC P013A00: O2 Sensor Slow Response - Rich to Lean Bank 1 Sensor 2 [10/2015 - ]
- DTC P014C-00: O2 Sensor Slow Response - Rich to Lean Bank 1 Sensor 1; DTC P014D00: O2 Sensor Slow Response - Lean to Rich Bank 1 Sensor 1; DTC P015A00: O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 1; DTC P015B00: O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 1 [10/2015 - 09/2018]
- DTC P014C-00: O2 Sensor Slow Response - Rich to Lean Bank 1 Sensor 1; DTC P014D00: O2 Sensor Slow Response - Lean to Rich Bank 1 Sensor 1; DTC P015A00: O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 1; DTC P015B00: O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 1 [09/2018 - ]
- DTC P0171-00: System Too Lean Bank 1; DTC P017200: System Too Rich Bank 1; DTC P117000: Fuel Performance/Port Injector; DTC P117B00: Fuel Performance/Direct Injector [10/2015 - 09/2018]
- DTC P0171-00: System Too Lean Bank 1; DTC P017200: System Too Rich Bank 1; DTC P117000: Fuel Performance/Port Injector; DTC P117B00: Fuel Performance/Direct Injector [09/2018 - ]
- DTC P0190-11: Fuel Rail Pressure Sensor "A" Circuit Short to Ground [10/2015 - ]
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.