2016 Lexus LS 600hFACTORY OEM SERVICE PROCEDURE

LS600h All Models

LS600h All Models

Measurement Minimum Preferred Maximum
Left Front Caster (°) 4.22 4.97 5.72
Right Front Caster (°) 4.22 4.97 5.72
Left Front Camber (°) -1.42 -0.67 0.08
Right Front Camber (°) -1.42 -0.67 0.08
Front Toe (°) -0.16 0 0.16
Left SAI (°) 8.15 8.9 9.65
Right SAI (°) 8.15 8.9 9.65
Left Rear Camber (°) -2.43 -1.68 -0.93
Right Rear Camber (°) -2.43 -1.68 -0.93
Rear Toe (°) 0.09 0.25 0.41
Thrust Angle (°) 0 0 0
Left Toe Out, Inward (°) 0 0 0
Right Toe Out, Inward (°) 0 0 0
Left Toe Out, Outward (°) 0 0 0
Right Toe Out, Outward (°) 0 0 0
Left Max Turn, Inward (°) 36.03 38.03 40.03
Right Max Turn, Inward (°) 36.03 38.03 40.03
Left Max Turn, Outward (°) 33.65 33.65 33.65
Right Max Turn, Outward (°) 33.65 33.65 33.65
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.