Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Problem Symptoms Table [08/2012 - ]
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | See |
|---|---|---|
| Wander/Pulls | Tires (Worn or improperly inflated) | Refer to INSPECTION [08/2012 - ] |
| Wheel alignment (Incorrect) | Refer to ADJUSTMENT [08/2012 - ] | |
| Steering gear (Loose or worn) | Refer to REMOVAL [08/2012 - ] | |
| Stabilizer bar (Loose) | Refer to REMOVAL [08/2012 - ] | |
| Front wheel shimmy | Tires (Worn or improperly inflated) | Refer to INSPECTION [08/2012 - ] |
| Wheels (Out of balance) | Refer to INSPECTION [08/2012 - ] | |
| Shock absorber (Worn) | Refer to REMOVAL [08/2012 - ] | |
| Wheel alignment (Incorrect) | Refer to ADJUSTMENT [08/2012 - ] | |
| Lower ball joint (Worn) | Refer to REMOVAL [08/2012 - ] | |
| Hub bearings (Loose or worn) | Refer to ON-VEHICLE INSPECTION [08/2012 - ] | |
| Steering gear (Loose or worn) | Refer to REMOVAL [08/2012 - ] | |
| Rear wheel shimmy | Hub bearings (Loose or worn) | Refer to ON-VEHICLE INSPECTION [08/2012 - ] |
| Shock absorber (Worn) | Refer to REMOVAL [08/2012 - ] |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.