2013 Lexus IS 350C BaseFACTORY OEM SERVICE PROCEDURE

Jam Protection Function does not Operate: Procedure

  1. PERFORM INITIALIZATION (POWER WINDOW CONTROL SYSTEM (APPLICABLE LOCATION)) 
    1. Initialize the power window control system (applicable location). Refer to INITIALIZATION [08/2012 - ] .

    NEXT: Go to next step 

  2. CHECK JAM PROTECTION FUNCTION OPERATING RANGE 
    1. Check if the jam protection function operates normally for the applicable power window.

      HINT: 

      The jam protection function will not operate within 15 mm (0.591 in.) of the fully closed position.

      OK

      Jam protection function operates normally.

      Result

      Result Proceed to
      OK A
      NG (Driver door window) B
      NG (Front passenger door window) C

    B → See step   3 

    C → See step   4 

    A → END (INITIALIZATION WAS INCORRECT) 

  3. REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY. Refer to  REMOVAL [08/2012 - ] 
  4. REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY. Refer to  REMOVAL [08/2012 - ] 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.