2012 Lexus LS 460 AWDFACTORY OEM SERVICE PROCEDURE

Service Data

Fuel pressure Standard fuel pressure at idle 196 to 588 kPa
(2.0 to 6.0 kgf/cm2 , 28 to 85 psi)
remains for 5 minutes after engine has stopped 147 kPa
(1.5 kgf/cm2 , 21 psi) or more
Fuel injector
(for Direct injection)
Standard resistance 20°C (68°F) 2.01 to 2.31 Ω
Fuel injector
(for Port injection)
Standard resistance 20°C (68°F) 11.6 to 12.4 Ω
Standard Injection volume 84 to 102 cm3 (5.1 to 6.2 cu in.) per 15 seconds
Difference between each cylinder 18 cm3 (1.1 cu in.) or less
Fuel leakage 1 drop or less per in 20 minutes
Fuel pressure sensor Standard resistance Apply 5 V between terminals Approximately 0.5 Ω
Fuel pump Standard resistance 20°C (68°F) 0.2 to 3.0 Ω
Fuel pump
(for High pressure)
Standard resistance 20°C (68°F) 0.19 to 1.39 Ω
Fuel pump resistor Standard resistance 20°C (68°F) 0.3 to 0.34 Ω
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.