2012 Lexus LS 460 AWDFACTORY OEM SERVICE PROCEDURE

DTC P060D: Internal Control Module Accelerator Pedal Position Performance: Procedure

  1. READ OUTPUT DTC (DTC P060D)Β 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Clear DTCs. Refer to DTC CHECK / CLEAR .
    5. Turn the engine switch off and turn the Techstream off.
    6. Disconnect the Techstream.
    7. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute. Refer to PRECAUTION .
    8. Connect the cable to the negative (-) battery terminal. Refer to PRECAUTION .
    9. Connect the Techstream to the DLC3.
    10. Turn the engine switch on (IG).
    11. Turn the Techstream on.
    12. Select the following menu items: Powertrain / Engine / Trouble Codes.
    13. Read the DTCs.

      Result

      Result Proceed to
      No output A
      P060D B

    B β†’ See step Β Β 3Β 

    A β†’ See step Β Β 2Β 

  2. CHECK FOR INTERMITTENT PROBLEMS. Refer to Β CHECK FOR INTERMITTENT PROBLEMSΒ 
  3. REPLACE ECM. Refer to Β REMOVALΒ 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.