Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function): Precaution: Precaution
- PRECAUTIONS FOR PUSH-BUTTON START FUNCTION:
- Before starting the engine, firmly depress the brake pedal until the indicator in the engine switch turns green.
- The power source mode (off, on (ACC), on (IG)) is always retained in memory by the vehicle. If the battery is disconnected, the power source mode that was present before disconnection will be restored after the battery is reconnected. Be sure to turn the engine switch off before disconnecting the cable from the negative battery terminal. Be careful if the power source mode of a vehicle with a discharged battery is not known.
- After the battery is reconnected, be sure to wait 10 seconds or more before attempting to start the engine. The engine may not start immediately after the battery is reconnected.
- If the electrical key is held near the engine switch to start the engine when the electrical key battery is depleted, the following warnings will sound:
- Driver's door open → closed
- An exit warning will sound if the shift lever is in a position other than P and the power source is in a mode other than off.
- An exit warning will sound if the shift lever is in P and the power source is in a mode other than off.
- Doors other than the driver door open → closed
- A warning will sound to indicate that the electrical key has been taken out of the vehicle.
- Driver's door open → closed
These warnings will sound because it is not possible for the vehicle to determine if the key is present in the vehicle (due to the depleted key battery). These warnings do not indicate system malfunctions.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.