2011 Lexus LX 570FACTORY OEM SERVICE PROCEDURE

Problem Symptoms Table

HINT:Β 

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

CLOCK SYSTEM

Symptom Suspected Area See
Clock is not displayed Navigation ECU power source circuit Refer to Navigation ECU Power Source Circuit
Clock time is very incorrect Clock loses or gains time -
Replace display and navigation module display assembly Refer to REMOVAL
Nighttime clock illumination does not operate Illumination circuit Refer to Illumination Circuit
Replace display and navigation module display assembly Refer to REMOVAL
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.