2011 Lexus LS 460 AWDFACTORY OEM SERVICE PROCEDURE

Service Data

Battery current sensor 2 (VC) - 4 (E2) Resistance:
3 to 10 kΩ at 20°C (68°F)
2 (VC) - 3 (IB) Resistance:
0.5 kΩ or less at 20°C (68°F)
3 (IB) - 4 (E2) Resistance:
3 to 10 kΩ at 20°C (68°F)
1 (THB) - 4 (E2) Resistance:
1.5 to 2.5 kΩ at 20 to 30°C (68 to 86°F)
0.3 to 6.0 kΩ at 0 to 70°C (32 to 158°F)
Chapter Navigation
Return to Chapter: Service Data
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.