2011 Lexus IS FFACTORY OEM SERVICE PROCEDURE

Cigarette Lighter: Installation: Installation

  1. INSTALL CIGARETTE LIGHTER ASSEMBLY 
    1. Install the cigarette lighter retainer.
      Fig 1: Installing Cigarette Lighter Retainer
      GTY153720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the cigarette lighter socket.
      Fig 2: Installing Cigarette Lighter Socket
      GTY132901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Turn the ring nut in the direction indicated by the arrow to install it.
      Fig 3: Turning Ring Nut
      GTY153722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Engage the clip.
      Fig 4: Identifying Cigarette Lighter Clip
      GTY127373Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Install the cigarette lighter knob and element assembly.
  2. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY  . Refer to INSTALLATION - Step 43
  3. INSTALL CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 45
  4. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH  . Refer to INSTALLATION - Step 46
  5. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH  . Refer to INSTALLATION - Step 47
  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  . Refer to INSTALLATION - Step 48
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.