2009 Lexus LS 600hLFACTORY OEM SERVICE PROCEDURE

Navigation Check Mode

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

  • This mode displays GPS satellite information
  • Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle
  1. ENTER DIAGNOSTIC MODEĀ  (See DTC CHECK / CLEARĀ  )
  2. NAVIGATION CHECKĀ 
    1. Select "Navigation Check" from the "Diagnosis Menu" screen
      Fig 1: Selecting Navigation Check On Diagnosis Menu Screen
      G04945482Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  3. GPS INFORMATIONĀ 
    1. Select "GPS Information" from the "Navigation check" screen.
      Fig 2: Selecting GPS Information On Navigation Check Screen
      G04945483Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. When GPS information is displayed, check the GPS conditions.

      HINT:

      • This screen is updated once per second when input signals to the vehicle are changed.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTIONĀ  .
        Fig 3: Display - GPS Information
        G05156585Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  4. VEHICLE SENSORSĀ 
    1. Select "Vehicle Sensors" from the "Navigation check" screen
      Fig 4: Selecting Vehicle Sensors On Navigation Check Screen
      G04945485Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check all the signals and sensors when vehicle signal information is displayed.

      HINT:

      • This screen is updated once per second when input signals to the vehicle are changed.
      • This screen displays vehicle signals input to the navigation ECU.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTIONĀ  .
        Fig 5: Display - Vehicle Signal Information
        G04945263Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  5. COLOR BAR CHECKĀ 
    1. Select "Color Bar Check" from the "Navigation check" screen.
      Fig 6: Selecting Color Bar Check On Navigation Check Screen
      G04945487Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check each color of the color bar when the "NAVI Color Bar Check" screen is displayed.

      HINT:

      • Colors will not be displayed full-screen as in "Display Check Mode"
      • This screen displays the navigation ECU display color
        Fig 7: Display - NAVI Color Bar Check Screen
        G04945265Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  6. MEMORY COPY/PASTE CHECKĀ 
    1. Select "Memory Copy/Paste" from "Navigation check" screen
      Fig 8: Selecting Memory Copy/Paste On Navigation Check Screen
      G04945489Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. HDD memory can be copied or pasted.
      Fig 9: Display - HDD Memory Copy/Paste Screen
      G04945490Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  7. PARTS INFORMATIONĀ 
    1. Select "Parts Information" from the "Navigation check" screen.
      Fig 10: Selecting Parts Information On Navigation Check Screen
      G04945491Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the navigation and disc information when the "Parts Information" screen is displayed
      Fig 11: Display - Parts Information Screen
      G04945268Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002

      Screen descriptionĀ 

      SCREEN DESCRIPTION CHART

      Display Contents
      Navigation Manufacturer/*1 Navigation ECU manufacturer is displayed
      Navigation Version/*2 Navigation ECU version is displayed
      Disc Manufacturer/*3 Map disc manufacturer is displayed
      Disc Version/*4 Map disc version is displayed
  8. MIC & VOICE RECOGNITION CHECKĀ 
    1. Select "Mic & Voice Recognition Check" on the "Navigation check" screen to display the "MICROPHONE & VOICE RECOGNITION CHECK" screen
      Fig 12: Selecting Mic & Voice Recognition On Navigation Check Screen
      G04945493Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. When a voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
    3. Push the recording switch and perform voice recording.
    4. Check that the recording indicator remains on while recording and that the recorded voice is played normally.

      HINT:

      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTIONĀ 
      • This function is controlled by the navigation ECU.
        Fig 13: Display - Microphone & Voice Recognition Check Screen
        G04945494Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  9. HDD INFORMATIONĀ 
    1. Select "HDD Information" from the "Navigation check" screen.
      Fig 14: Selecting HDD Information On Navigation Check Screen
      G04945495Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check for DTCs

      HINT:

      • This is the HDD check function in the display and navigation assembly.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTIONĀ 
        Fig 15: Display - DTC
        G04945496Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  10. AVC-LAN PLUS CHECKĀ 
    1. Select "AVC-LAN plus Check" from the "Navigation check" screen.
      Fig 16: Selecting AVC-LAN Plus Check On Navigation Check Screen
      G04945497Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the AVC-LAN plus check result.

      HINT:

      • This is the AVC-LAN plus check function in the display and navigation assembly.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTIONĀ  .
        Fig 17: Display - AVC-LAN Plus Check Result
        G04945498Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
  11. SOUND LIBRARY INFORMATIONĀ 
    1. Select "Sound Library" from the "Navigation check" screen.
      Fig 18: Selecting Sound Library On Navigation Check Screen
      G04945499Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the sound library data.

      HINT:

      • This is the sound library information function in the display and navigation assembly.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTIONĀ  .
        Fig 19: Display - Sound Library Information
        G04945500Courtesy of Ā© TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.