2009 Lexus LS 460 AWDFACTORY OEM SERVICE PROCEDURE

Repair and Diagnosis: Electrical: Starter: Preparation: Axle: SST

AXLE - SST

G06195208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09650-17011 Hub Bolt Remover -
G06195209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09930-00010 Drive Shaft Nut Chisel -
G06195210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-70010 Handle Set -
G06195211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-07150) Handle 150 -
G06195212Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09951-01000 Replacer 100 -
G06195213Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09960-20010 Set
Ball Joint Puller
-
G06195214Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09961-02010) Assembly
Ball Joint Puller
-
G06195215Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09961-02050) Spacer A -
G06195216Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09961-02060) Spacer B -
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.