HINT:

The following items can be customized.

NOTE:

Be sure to record the current settings before customizing.
When the customer requests a change in a function, first make sure that the function(s) can be customized.
When troubleshooting a function, first make sure that the function is set to the default setting.

POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

Multiplex tilt and telescopic ECU

MULTIPLEX TILT AND TELESCOPIC ECU - CUSTOMIZE PARAMETERS

Display (Item)	Default	Contents	Setting
Auto Away / Return Function	ON	ON / OFF of auto away / return function	ON / OFF

AIR CONDITIONING SYSTEM

A/C amplifier

A/C AMPLIFIER - CUSTOMIZE PARAMETERS

Display	Default	Contents	Setting
Set Shift Temperature	Normal	Function to control with shifted temperature against display temperature.	+2C / +1C / Normal -1C / -2C
Air Inlet Mode	Automatic	When turning A/C ON when you desire to cool compartment down quickly, this function changes mode automatically to RECIRCULATED mode.	Manual / Auto
Compressor Mode	Automatic	Function to turn A/C ON automatically by pressing AUTO button when the blower is ON and the A/C is OFF.	Manual / Auto
Compressor / Air Inlet DEF Operation	Link	Function to turn A/C ON automatically linking with FRONT DEF button when A/C is OFF.	Normal / Link
Air Inlet (PSW /LOCK) operation	Link	Function to change mode automatically to OUTSIDE AIR mode from RECIRCULATED mode linking with A/C button in case of A/C breakdown, etc.	Normal / Link
Emission Gas Sensor Shift	Normal	Function to change sensitivity of exhaust gas sensor.	Much More / More / Little More / Normal / Little Less / Less / Much Less
Foot Air Out Operation	ON	Function to turn air flow from lap-jet ON automatically when retractable hard top is housed	OFF / ON
Foot/DEF Auto Mode	ON	Function to turn air flow from FOOT / DEF ON automatically when AUTO MODE is ON	OFF / ON

THEFT DETERRENT SYSTEM

Selecting passive mode with Techstream.

Security

THEFT DETERRENT SYSTEM - CUSTOMIZE PARAMETERS

Display (Item)	Default	Contents	Setting
Passive Mode (Security System)	OFF	PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to arming state 30 seconds after key is removed from ignition key cylinder and driver side door is closed, even if doors are not locked by wireless or door key lock operation In PASSIVE MODE, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see ENTRY DELAY below) after door is opened: Unlock any door by key or wireless operation Reconnect battery Insert key into ignition key cylinder and turn ignition switch from OFF to ON	ON / OFF
Warning by Horn	ON	Function that allows vehicle horn and security horn to be able to be used as warning device	ON / OFF
Entry Delay Time	14 s	Function that changes entry delay time (time before warning starts) for PASSIVE MODE	0 s/14 s/30 s

Selecting passive mode without Techstream.

Fig 1: Flow Chart For Selecting Passive Mode Without Intelligent Tester (1 Of 3)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Customize Parameters