Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications
Camshaft Timing Oil Control Valve
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Camshaft oil control valve assembly (for Bank 1) X Cylinder head cover LH | 10 | 102 | 7 |
| Camshaft oil control valve assembly (for Bank 2) X Cylinder head cover RH | 10 | 102 | 7 |
Throttle Body
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Throttle body x Intake manifold | 10 | 102 | 7 |
ECM
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Connector holder block x Body | 8.0 | 82 | 71 in.*lbf |
| ECM x Body | 80 | 82 | 71 in.*lbf |
Accelerator Pedal
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Accelerator pedal x Body | 5.4 | 55 | 48 in.*lbf |
Mass Air Flow Meter
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Mass air flow meter x Air cleaner cap | 1.7 | 17 | 15 in.*lbf |
Camshaft Position Sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Camshaft position sensor x Cylinder head cover LH | 10 | 102 | 7 |
| WT sensor x Cylinder head cover LH | 10 | 102 | 7 |
| WT sensor x Cylinder head cover RH | 10 | 102 | 7 |
Crankshaft Position Sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Crankshaft position sensor protector x No. 1 oil pan | 10 | 102 | 7 |
| Crankshaft position sensor x No 1 oil pan | 10 | 102 | 7 |
Ignition Coil And Spark Plug
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 21 | 214 | 15 |
| Ignition coil x Cylinder head cover | 10 | 102 | 7 |
| Water by-pass pipe assembly x cylinder head cover | 18 | 184 | 13 |
| Water by-pass pipe assembly x Automatic transmission | 18 | 184 | 13 |
| Water by-pass pipe assembly x cylinder head cover | 10 | 102 | 7 |
| Water by-pass pipe assembly x Timing chain cover | 10 | 102 | 7 |
Engine Coolant Temperature Sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Engine coolant temperature x Front water by-pass joint | 20 | 200 | 14 |
Knock Sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Knock sensor x Cylinder block | 20 | 204 | 15 |
Air Fuel Ratio Sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Air fuel ratio sensor (for Bank 1) x Front No. 2 exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
| Air fuel ratio sensor (for Bank 2) x Front exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
Heated Oxygen Sensor
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Heated oxygen sensor (for Bank 1) x Front No. 2 exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
| Heated oxygen sensor (for Bank 2) x Front exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
Power Steering Oil Pressure Switch
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Power steering pressure switch x Power feed tube | 21 | 214 | 15 | |
| Front height control sensor sub-assembly x Frame | for bolt | 13 | 127 | 9 |
| Front height control sensor sub-assembly x Front suspension upper arm assembly LH | for nut | 5.6 | 57 | 50 in.*lbf |
(): For use with SST
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.