Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Service Data
Brake Actuator
| Item | Tester Connection | Specified Condition |
|---|---|---|
| Brake actuator assembly | 20 (SMC1)-19 (BS1) | 15 3 to 25.0 Ω |
| 6 (SMC2) - 7 (BS2) | ||
| 8 (FRA+) - 5 (FRA-) | 3.6 to 6.0 Ω | |
| 22 (FRR+) - 21 (FRR-) | ||
| 13 (FLA+)-14 (FLA-) | ||
| 27 (FLR+) - 28 (FLR-) | ||
| 12 (RRA+)-11 (RRA-) | ||
| 10 (RLA+)-9 (RLA-) | ||
| 26 (RRR+) - 25 (RRR-) | 4.4 to 7.0 Ω | |
| 24 (RLR+) - 23 (RLR-) | ||
| Brake accumulator pump | A2 (BM1)-A4 (GND1) | 10 Ω or less |
| B2 (BM2)-A4 (GND1) | ||
| A2 (BM1)-B2 (BM2) | Below 1 Ω | |
| A4 (GND1)-B1 (GND2) | ||
| A2 (BM1)-A1 (MTT) | 950 to 1050 Ω | |
| B2 (BM2) - A1 (MTT) |
Skid Control Buzzer
| Item | Measurement Condition | Specified Condition |
|---|---|---|
| Skid control buzzer assembly | Battery positive (+) → Terminal 2 | Skid control buzzer sounds |
| Battery negative (-) → Terminal 1 |
ABS Motor Relay (ABS MTR1)
| Item | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| ABS motor relay (ABS MTR1) | Terminal 23 or 24 - Body ground | Motor relay ON | 11 to 14 V |
| Motor relay OFF | 0 V | ||
| Terminal 25 or 26 - Body ground | - | 11 to 14 V |
ABS Motor Relay (ABS MTR2)
| Item | Tester Connection | Specified Condition |
|---|---|---|
| ABS motor relay (ABS MTR2) | 3-5 | 10 kΩ or higher |
| Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.