2008 Lexus LS 460LFACTORY OEM SERVICE PROCEDURE

Oil Pump: Disassembly

  1. REMOVE OIL PUMP O-RING 
    1. Remove the O-ring from the oil pump.
      Fig 1: Identifying Oil Pump Oil-Ring
      G05847960Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. FIX OIL PUMP ASSEMBLY 
    1. Place the oil pump body on the torque converter clutch.
      Fig 2: Identifying Oil Pump Assembly
      G04948805Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE CLUTCH DRUM OIL SEAL RING 
    1. Remove the 4 oil seal rings.
      Fig 3: Identifying Clutch Drum Oil Seal Ring
      G04948806Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 1 BRAKE PISTON 
    1. Using a T30 "TORX" wrench, remove the 5 bolts, brake piston return spring sub-assembly and No. 1 brake piston.
    2. Remove the 2 O-rings from the No. 1 brake piston.
      Fig 4: Identifying No. 1 Brake Piston Return Spring Sub-Assembly
      G04948807Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE STATOR SHAFT CLUTCH DRUM THRUST WASHER 
    Fig 5: Identifying Stator Shaft Clutch Drum Thrust Washer
    G04948808Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSPECT NO. 1 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY  (See INSPECTION  )
  7. REMOVE STATOR SHAFT ASSEMBLY 
    1. Remove the 2 bolts and stator shaft from the oil pump body.
      Fig 6: Locating Stator Shaft Bolts
      G04948809Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE FRONT OIL PUMP BODY O-RING 
    1. Remove the oil pump body from the torque converter clutch.
    2. Remove the O-ring from the oil pump body.
      Fig 7: Identifying O-ring Of Oil Pump Body
      G04948810Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSPECT STATOR SHAFT ASSEMBLY  (See INSPECTION  )
  10. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY  (See INSPECTION  )
  11. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY  (See INSPECTION  )
  12. REMOVE FRONT OIL PUMP DRIVE GEAR 
    1. Remove the drive gear.
      Fig 8: Identifying Front Oil Pump Drive Gear
      G04948811Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE FRONT OIL PUMP DRIVEN GEAR 
    1. Remove the driven gear.
      Fig 9: Identifying Front Oil Pump Driven Gear
      G04948812Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE FRONT OIL PUMP OIL SEAL 
    1. Using a screwdriver, pry out the oil seal.
      NOTE: Do not damage the bushing and oil pump body.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.