2008 Lexus LS 460LFACTORY OEM SERVICE PROCEDURE

Diagnostic Trouble Code Chart

HINT:

If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to table below.

Front Power Seat Control System 

FRONT POWER SEAT CONTROL SYSTEM - DIAGNOSTIC TROUBLE CODE (DTC) CHART

DTC Code Detection Item Trouble Area
B2650  Slide Sensor Malfunction
  • Front power seat switch
  • Front seat adjuster assembly
  • Harness or connector
B2651  Reclining Sensor Malfunction
  • Front power seat switch
  • Front seat adjuster assembly
  • Harness or connector
B2652  Front Vertical Sensor Malfunction
  • Front power seat switch LH
  • Front seat adjuster assembly LH
  • Harness or connector
B2653  Lifter Sensor Malfunction
  • Front power seat switch
  • Front seat adjuster assembly
  • Harness or connector
B2654  Headrest Sensor Malfunction
  • Front power seat switch
  • Front seat headrest adjuster
  • Power seat motor assembly
  • Harness or connector
B2655  Cushion Length Sensor Malfunction
  • Front power seat switch LH
  • Front seat adjuster assembly LH
  • Harness or connector
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.