Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Lexus LS 460FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.60 OZS. | 0.13 L | PAG 46 | S | |||
| Air Cond Refrigerant | w/o Rear A/C | 1.30 LBS. | 0.58 KG | R-134a | S | ||
| Air Cond Refrigerant | w/Rear A/C | 1.65 LBS. | 0.74 KG | R-134a | S | ||
| Automatic Transmission Fluid | Drain and Refill | 3.00 QTS. | 2.83 L | TOYOTA Genuine Automatic Transmission Fluid Type WS | Using Fluid other than TOYOTA Genuine Automatic Transmission WS will damage the Transmission. | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 1.42 QTS. | 1.34 L | TOYOTA Genuine Differential Gear Oil LT75W-85 GL-5 or equivalent | S | |||
| Engine Coolant | 11.70 QTS. | 11.07 L | TOYOTA Super Long Life Coolant or equivalent | DO NOT use plain water alone. | S | ||
| Engine Oil | Drain and Refill,w/Filter | 9.10 QTS. | 8.61 L | API - SAE 5W-20, 0W-20 | SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. | S | |
| Engine Oil | Drain and Refill,w/o Filter | 8.90 QTS. | 8.42 L | API - SAE 5W-20, 0W-20 | SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. | S | |
| Fuel Tank | 22.10 GALS. | 83.65 L | S | ||||
| Windshield Washer Fluid | N/A | N/A | Washer Fluid | Refer to the freezing temperatures listed on the washer fluid tank. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.