Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications
Brake Actuator
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake actuator x No. 3 brake actuator bracket | 9.3 | 95 | 82 in.*lbf |
| Brake actuator x Brake actuator bracket | 9.2 | 94 | 81 in.*lbf |
| Brake actuator x No. 4 brake actuator bracket | 18 | 184 | 13 |
| Brake actuator x Brake accumulator pump connector box | 6.0 | 61 | 53 in.*lbf |
| Brake tube flare nut (without union nut wrench) | 15 | 155 | 11 |
| Brake tube flare nut (with union nut wrench) | 14 | 145 | 10 |
| No. 5 brake actuator bracket x Body | 11 | 112 | 8 |
| Brake actuator and brake accumulator pump assembly bolt | 20 | 204 | 15 |
| Brake actuator and brake accumulator pump assembly nut |
Front Speed Sensor
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Skid control sensor wire clamp bolt | 8.5 | 87 | 75 in.*lbf |
Rear speed sensor
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Rear speed sensor bolt | 8.5 | 87 | 75 in.*lbf |
| Skid control sensor wire clamp bolt | |||
| Skid control sensor wire clamp nut | 5.5 | 56 | 49 in.*lbf |
Yaw Rate Sensor
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Yaw rate sensor bolt | 9.0 | 92 | 80 in.*lbf |
Skid Control ECU
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Skid control ECU bracket bolt | 8.5 | 87 | 75 in.*lbf |
| Skid control ECU bracket nut | |||
| Skid control ECU bolt | |||
| Skid control ECU nut |
Brake Control Power Supply
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake control power supply assembly x No. 1 brake control power supply bracket | 8.5 | 87 | 75 in.*lbf |
| Brake control power supply assembly x Body | 8.0 | 82 | 71 in.*lbf |
Brake Pedal Stroke Sensor
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake pedal stroke sensor bolt | 8.5 | 87 | 75 in.*lbf |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.