2008 Lexus IS FFACTORY OEM SERVICE PROCEDURE

Service Data

BRAKE (FRONT) - SERVICE DATA

Front brake pad lining thickness Standard 9 8 mm (0.386 in)
Minimum 1.0 mm (0.0394 in)
Front brake disc thickness Standard 30.0 mm (1.18 in),
Minimum 28.0 mm (1.10 in)
Front brake disc runout Maximum 0.06 mm (0.00236 in)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.