2008 Lexus IS FFACTORY OEM SERVICE PROCEDURE

Oil Level Sensor: Installation

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Insert the engine oil level sensor into the oil pan and rotate it 180° clockwise.
      Fig 1: Inserting Engine Oil Level Sensor Into Oil Pan
      G05750414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the engine oil level sensor with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    4. Connect the engine oil level sensor connector.
    Fig 2: Locating Engine Oil Level Sensor Connector Bolts
    G04943199Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CRANK POSITION SENSOR BRACKET 
    1. Install the crank position sensor bracket with the bolt

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    2. Connect the harness clamp.
    Fig 3: Locating Crank Position Sensor Bracket Bolt
    G05750409Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CONNECT OIL COOLER TUBE  (See INSTALLATION )
  4. ADD AUTOMATIC TRANSMISSION FLUID 

    (See AUTOMATIC TRANSMISSION FLUID )

  5. ADD ENGINE OIL  (See OIL AND OIL FILTER )
  6. INSPECT FOR OIL LEAK 
  7. CHECK ENGINE OIL LEVEL  (See LUBRICATION SYSTEM )
  8. INSTALL FRONT LOWER SUSPENSION MEMBER PROTECTOR  (See INSTALLATION )
  9. INSTALL NO. 2 ENGINE UNDER COVER 
  10. INSTALL ENGINE UNDER COVER 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.