Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

INSTALL SPEED SENSOR SP2
1. Install the speed sensor to the transmission case with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the sensor connector.
  
  Fig 1: Locating Speed Sensor NP2 Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SPEED SENSOR NC3
1. Install the speed sensor to the transmission case with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the sensor connector.
  
  Fig 2: Locating Speed Sensor NC3 Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SPEED SENSOR NT
1. Coat a new O-ring with ATF and install it to the speed sensor.
2. Using a T30 "TORX" wrench, install the speed sensor with the bolt.
  Torque: 6.8 N*m (69 kgf*cm, 60 in.*lbf)
3. Connect the sensor connector.
INSTALL TRANSMISSION VALVE BODY ASSEMBLY (See INSTALLATION )

Fig 3: Locating Speed Sensor NT Connector And Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VALVE BODY OIL STRAINER ASSEMBLY (See INSTALLATION )
INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See INSTALLATION )
ADD AUTOMATIC TRANSMISSION FLUID
1. Add automatic transmission fluid (see AUTOMATIC TRANSMISSION FLUID ).

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Speed Sensor: Installation