2008 Lexus ES 350FACTORY OEM SERVICE PROCEDURE

DTC B2313 Glass Position Initialization Incomplete: Description

The power window control system that is located in each door consists of a power window master switch, power window switches, regulators, and motors with an integrated ECU. A power window regulator motor is controlled by the ECU when the power window switch is operated (models with jam protection).

When only of the ECUs determines that the power window regulator motor assembly has not been initialized, DTC B2313 is set

NOTE: The power window control system uses a serial communication protocol (LIN) to communicate with the main body ECU. Inspect the communication function by following HOW TO PROCEED WITH TROUBLESHOOTING. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

HINT:

  • Replacing the door glass or door glass run may cause a difference to exist between the current door glass position and the position memorized in the ECU. In this case, the jam protection function may work improperly Return the system to the pre-initialized condition and reinitialize the system
  • To return the system to the pre-initialized condition.

    Disconnect the power window regulator motor connector during power window operation. This will return the motor to the pre-initialized condition.

DTC DETECTION CONDITION CHART

DTC No DTC Detection Condition Trouble Area
B2313
  • The power window regulator motor is not initialized
  • The power window regulator motor malfunctions
  • Power window regulator motor
  • Power window regulator motor not initialized
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.