2007 Lexus SC 430FACTORY OEM SERVICE PROCEDURE

Valve Body Assembly: Disassembly

  1. REMOVE SHIFT SOLENOID VALVE SL2 
    1. Remove the bolt, 2 straight pins and lock plate.
    2. Remove the shift solenoid valve SL2.
      Fig 1: Removing Shift Solenoid Valve SL2 Bolt, Straight Pins And Lock Plate
      G05289710Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE SHIFT SOLENOID VALVE SLU 
    Fig 2: Removing Shift Solenoid Valve SLU
    G05289711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT SOLENOID VALVE SLT 
    1. Remove the bolt, 2 straight pins and lock plate.
    2. Remove the shift solenoid valve SLT.
      Fig 3: Removing Shift Solenoid Valve SLT Bolt, Straight Pins And Lock Plate
      G05289712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE SHIFT SOLENOID VALVE SL1 
    Fig 4: Removing Shift Solenoid Valve SL1
    G05289713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE SHIFT SOLENOID VALVE SR 
    1. Remove the bolt and shift solenoid valve SR.
      Fig 5: Removing Shift Solenoid Valve SR Bolt
      G05289714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE SHIFT SOLENOID VALVE S1 
    Fig 6: Removing Shift Solenoid Valve SR Bolt
    G05289715Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE SHIFT SOLENOID VALVE S4 
    1. Remove the bolt and shift solenoid valve S4.
      Fig 7: Removing Shift Solenoid Valve S4 Bolt
      G05289716Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE SHIFT SOLENOID VALVE S2 
    Fig 8: Removing Shift Solenoid Valve S2
    G05289717Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE SHIFT SOLENOID VALVE S3 
    1. Remove the bolt and shift solenoid valve S3.
      Fig 9: Removing Shift Solenoid Valve S3 Bolt
      G05289718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.