2007 Lexus SC 430FACTORY OEM SERVICE PROCEDURE

Service Data

BRAKE - SERVICE DATA

Brake pedal height (from asphalt sheet) 154.0 to 164.0 mm (6.063 to 6.457 in.)
Brake pedal free play 0.2 to 2.0 mm (0.008 to 0.079 in.)
Stop light switch clearance 0.5 to 2.4 mm (0.020 to 0.094 in.)
Pedal reserve distance (from asphalt sheet at 196 N (20 kgf, 44.1 lbf)) More than 100 mm (3.94 in.)
Front brake pad lining thickness Standard 11.0 mm (0.433 in.)
Minimum 1.0 mm (0.039 in.)
Front disc thickness Standard 32.0 mm (1.260 in.)
Minimum 30.0 mm (1.181 in.)
Front disc runout Maximum 0.05 mm (0.0020 in.)
Rear brake pad lining thickness Standard 10.5 mm (0.413 in.)
Minimum 1.0 mm (0.039 in.)
Rear disc thickness Standard 12.0 mm (0.472 in.)
Minimum 10.5 mm (0.413 in.)
Rear disc runout Maximum 0.05 mm (0.0020 in.)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.