2007 Lexus SC 430FACTORY OEM SERVICE PROCEDURE

Knock Sensor: Installation

  1. INSTALL KNOCK SENSOR 
    1. Install the 2 knock sensors with the 2 nuts, as shown in the illustration.
      Fig 1: Identifying Knock Sensors With Nuts
      G05291614Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

    2. Connect the 2 knock sensor connectors.
  2. INSTALL INTAKE MANIFOLD 
    1. Install the intake manifold (see INSTALLATION ).
  3. INSTALL INTAKE AIR CONNECTOR PIPE (See  INSTALLATION  ) 
  4. INSTALL NO. 1 AIR CLEANER INLET (See  INSTALLATION  ) 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  7. ADD ENGINE COOLANT (See  COOLANT  ) 
  8. CHECK FOR ENGINE COOLANT LEAKS (See  COOLING SYSTEM  ) 
  9. CHECK FOR FUEL LEAKS (See  ON-VEHICLE INSPECTION  ) 
  10. INSTALL V-BANK COVER (See  INSTALLATION  ) 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.