2007 Lexus SC 430FACTORY OEM SERVICE PROCEDURE

Combination Meter: Installation

  1. INSTALL COMBINATION METER ASSEMBLY 
  2. INSTALL TURN SIGNAL SWITCH ASSEMBLY 
  3. INSTALL STEERING COLUMN COVER UPPER 
  4. INSTALL STEERING COLUMN COVER LOWER (See  INSTALLATION  ) 
    Fig 1: Identifying Steering Column Cover Lower
    G05293038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Connect the connector.
    2. Attach the 4 clips to install the panel.
      Fig 2: Identifying Instrument Cluster Finish Panel Clips
      G05293039Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  8. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.