Customize Parameters

HINT:

The following items can be customized.

1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 

   Tilt & Telesco 

   TILT & TELESCO - CUSTOMIZE PARAMETERS
   
   

   DISPLAY	DEFAULT	CONTENTS	SETTING
   AUTO AWAY/RETURN FUNCTION	ON	ON/OFF of the auto away/return function	ON/OFF

2. AIR CONDITIONING SYSTEM 

   AIR CONDITIONER 

   AIR CONDITIONER - CUSTOMIZE PARAMETERS
   
   

   DISPLAY (ITEM)	DEFAULT	CONTENTS	SETTING
   SET TEMP SHIFT (Set temperature shift)	NORMAL	To control with the shifted temperature against the display temperature.	+2C / +1C / NORMAL / -1C / -2C
   AIR INLET MODE (Air inlet mode)	AUTO	In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode.	MANUAL / AUTO
   COMPRESSOR MODE (Compressor mode)	AUTO	Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF.	MANUAL / AUTO
   COMPRESSOR/DEF OPER (Compressor/DEF operation mode)	LINK	Function to turn the A/C ON automatically linking with the FRONT DEF button when the A/C is OFF.	NORMAL / LINK
   FOOT/DEF MODE (Foot/DEF auto mode)	ON	Function to turn the air flow from FOOT/DEF to ON automatically when AUTO MODE is ON.	OFF / ON
   AUTO BLOW UP (Foot/DEF automatic blow up function)	ON	Function to switch the blower level automatically when the defroster is ON.	OFF / ON
   AMBIENT TMP SFT (Ambient temperature shift)	NORMAL	To control with the shifted ambient temperature against the display ambient temperature.	+3C / +2C / +1C / NORMAL / -1C / -2C / -3C

3. THEFT DETERRENT SYSTEM 

   THEFT DETERRENT SYSTEM 

   THEFT DETERRENT SYSTEM - CUSTOMIZE PARAMETERS
   
   

   DISPLAY (ITEM)	DEFAULT	CONTENTS	SETTING
   PASSIVE MODE (Passive Arming Mode)	OFF	PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is removed from ignition key cylinder and driver side door is closed, even if doors are not locked by wireless or door key lock operation In PASSIVE MODE, if you do not perform following operations within 14 seconds after door is opened during armed state, theft deterrent system will judge that condition as a theft and switch to alarm sounding state Unlock any door by wireless operation Reconnect battery Insert key into ignition key cylinder and turn ignition switch from OFF to ON Unlock any door by key operation	ON/OFF
   WARN BY HORN (Warning by horn)	ON	Function that makes vehicle horn and theft deterrent horn be able to be used as a warning device	ON/OFF
   ENTRY DELAY (Entry delay time)	14 s	Function that changes entry delay time (time before warning starts) for PASSIVE MODE	0 s/14 s/30 s

4. LIGHTING SYSTEM 

   ILLUMINATED ENTRY 

   ILLUMINATED ENTRY - CUSTOMIZE PARAMETERS
   
   

   DISPLAY (ITEM)	DEFAULT	CONTENTS	SETTING
   LIGHTING TIME (Lighting Time)	15 s	To change the lighting time after closing the door. (It will quickly fade out in case of turning the ignition ON.)	7.5 s/15 s/30 s
   ILLUMI SYSTEM (Operation of illumination)	ON	Function to light up the step light, center console light and door inside handle light when one of the following occurs; the ignition turned ON, door unlock or door open.	ON / OFF
   LIGHT CONTROL (Light control)	ON	Function to light up the step light and door inside handle light when the ignition switch is ON and the shift position is not P.	ON / OFF
   I/L ON / UNLOCK (Interior light ON w/ door key unlock)	ON	Function to light up the interior light*, ignition light and step light when unlocking with the door key cylinder. *: Interior light comes on when the interior light switch is at the DOOR position.	ON / OFF
   I/L ON/ACC OFF (Illumination system with ACC OFF)	ON	Function to light the interior light* and door courtesy light when the ignition switch is operated from "ACC" to "LOCK". *: interior light comes on when the interior light switch is at the DOOR position.	ON/OFF

   LIGHT CONTROL 

   LIGHT CONTROL - CUSTOMIZE PARAMETERS
   
   

   DISPLAY (ITEM)	DEFAULT	CONTENTS	SETTING
   LIGHT OFF DELAY (Light Auto OFF Delay)	30 s	Function to keep on lighting the headlight for a certain period of time after closing all the doors with the ignition switch turned OFF from ON under the condition that the light control switch is at HEAD or AUTO with the headlight ON.	OFF/30 s/60 s/90 s
   LIGHT CTRL TYPE (Control Type)	CURRENT	To change the control logic when the light control switch is AUTO position. Refer to the *1 illustration (See  4) .	CURRENT / OLD
   SENSITIVITY (Turn ON luminous intensity)	NORMAL	To adjust the sensitivity of the lighting illumination. Refer to the *2 illustration (See Fig 1) .	DARK2 / DARK1 / NORMAL / LIGHT1 / LIGHT2
   DISP EX ON SEN (Display Extinction Luminous Intensity)	NORMAL	To change the brightness of lowering the lights such as the indicator light of the combination meter, A/C indicator light, clock. Refer to *3 illustration (See Fig 1) .	DARK2 / DARK1 / NORMAL / LIGHT1 / LIGHT2
   DISP EX OFF SEN (Display Extinction Release Luminous Intensity)	NORMAL	To change the brightness of canceling the lowering the lights such as the indicator light of the combination meter, A/C indicator light, clock. Refer to *4 illustration (See Fig 1) .	DARK2 / DARK1 / NORMAL / LIGHT1 / LIGHT2

   HINT:

   Sensitivity adjustment can hardly be confirmed. Please check by customer's actual driving.

   Illustration *1 

   LIGHT BRIGHTNESS CHART
   
   

   	Brightness of the surrounding when lighting	Lighting delay	Delay of turning light off	(2)
   OLD	Old logic	6 sec.	6 sec.	3 sec.
   CURRENT	New logic (1)('97/8-)	15 sec.	15 sec.	15 sec.
   (1) The new one has the logic to light up two times brighter than the old logic. (2) Delay time until the headlight is turned on when it suddenly gets dark.

   Fig 1: Light Brightness Chart

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. WIPER AND WASHER SYSTEM 

   WIPER 

   WIPER AND WASHER SYSTEM - CUSTOMIZE PARAMETERS
   
   

   Display (Item)	Default	Contents	Setting
   SPEED MODE (Speed mode)	Avail	Function to change to the intermittent operation when the vehicle comes to stop ( 0 vehicle speed) from running condition in case that the wiper switch is at the LO position.	NOT AVAIL / AVAIL
   AUTO WIPER (Auto wiper)	Avail	Function to operate the wiper automatically when it is raining	NOT AVAIL / AVAIL
   REWIPE CONTROL (Rewipe control)	SPD MOD	Function to change time until operating the wiper to prevent dropping after having used the washer.	OFF / 3 s / SPD MOD

6. POWER DOOR LOCK CONTROL SYSTEM 

   Body ECU 

   POWER DOOR LOCK CONTROL SYSTEM - CUSTOMIZE PARAMETERS
   
   

   Display (Item)	Default	Contents	Setting
   AUTO LOCK DELAY	30s	Function that selects AUTO LOCK time 30 sec. or 60 sec.	30s/60s
   AUTO LOCK (Auto Lock)	OFF	Function that locks doors when vehicle reaches a vehicle speed of 20 km/h (13 mph)	ON/OFF
   UNLK/KEY TWICE (Unlock w/ 2 times D key operation)	ON	Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice In OFF setting, turning it once unlocks all doors	ON/OFF
   ALL UNLK/OPN-CL (All unlock w/ D door open-close)	OFF	Function that unlocks all other doors when opening driver side door within 10 seconds after turning the ignition switch off from ON	ON/OFF
   UNLOCK/PARK (Unlock w/ IG ON, shift P, speed 0 (0 mph)	OFF	Function that unlocks doors when lever is shifted to P position from any position other than P while the ignition switch is ON	ON/OFF
   AUTO LOCK/SHIFT (Auto Lock/shift not P)	ON	Function that locks doors when lever is shifted from P position to any position other than P	ON/OFF

7. WIRELESS DOOR LOCK CONTROL SYSTEM 
   WIRELESS DOOR LOCK CONTROL SYSTEM - CUSTOMIZE PARAMETERS
   
   

   Item (Display)	Default	Contents	Setting
   OPEN DOOR WARN (Open door warning)	ON	If a door is not completely closed and LOCK is pressed, this function sounds a buzzer for 10 seconds.	ON / OFF
   WIRLS BUZZ RESP (Buzzer answer-back of Wireless)	ON	This function makes the wireless door lock buzzer sound for answer-back when LOCK/UNLOCK is pressed.	ON/OFF
   WIRELESS OPER (Wireless door lock control function)	ON	This function turns the wireless door lock function on or off.	ON / OFF
   ALARM FUNCTION (Panic function)	ON	This function operates the theft deterrent system when PANIC is pressed and held for 0.8 ((1)) or 2.5 ((2)) seconds.	ON / OFF
   UNLOCK/2OPER (Wireless unlock operated twice)	ON	This function unlocks the driver side door when UNLOCK is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK once unlocks all doors.	ON / OFF
   AUTO LOCK DELAY (Auto lock time)	30 s	This function controls the amount of time from unlocking doors to automatic re-locking.	30 s / 60 s
   HAZARD ANS BACK (Hazards answer-back for wireless door lock operation)	ON	When LOCK is pressed, all hazard warning lights flash once. When UNLOCK is pressed, all hazard warning lights flash twice.	ON / OFF
   (1) w/ Power Back Door (2) w/o Power Back Door

8. METER / GAUGE SYSTEM 
   1. BUZZER ON/OFF SETTING

      The buzzer ON/OFF setting, which is a setting of the buzzer function of the combination meter, can disable the driver side seat belt buzzer and front passenger side seat belt buzzer.

      NOTE: Basically, these buzzers should be set on for safe driving. Perform the procedures only if it is necessary to set the buzzer off.