2007 Lexus RX 350 AWDFACTORY OEM SERVICE PROCEDURE

Recommended Tools

RECOMMENDED TOOLS - DRIVE SHAFT

G05267722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09011-12301 Socket Wrench 30 mm
G05267723Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09040-00011 Hexagon Wrench Set
G05267724Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09043-20060) Socket Hexagon Wrench 6
G05267725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09904-00010 Expander Set
G05267726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09904-00050) No. 4 Claw
G05267727Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09905-00012 Snap Ring No.1 Expander
G05267728Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09905-00013 Snap Ring Pliers
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.