2007 Lexus LS 460LFACTORY OEM SERVICE PROCEDURE

Floor Shift Assembly: Reassembly

  1. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY 
    Fig 1: Locating Indicator Light Wire
    G04948535Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the 2 claws to install the wire to the control position indicator plate and connect the connector clamp.
  2. INSTALL SHIFT LOCK RELEASE BUTTON 
    Fig 2: Locating Shift Lock Release Button
    G04948540Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the claw to install the button.
  3. INSTALL POSITION INDICATOR SLIDE COVER 
    Fig 3: Identifying Position Indicator Slide Cover
    G04948533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the No. 2 slide cover to the slide cover.
    2. Install the slide cover to the shift position indicator.
  4. INSTALL SHIFT LEVER CAP 
    1. Attach the 2 claw to install the cap.
  5. INSTALL POSITION INDICATOR LENS 
    Fig 4: Identifying Shift Position Indicator Claws
    G04948532Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the 4 claws to install the lens to the shift position indicator.
  6. INSTALL CONTROL POSITION INDICATOR PLATE 
    Fig 5: Locating Control Position Indicator Plate Claw
    G04948543Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the claw to install the indicator plate.
  7. INSTALL SHIFT POSITION INDICATOR 
    Fig 6: Locating Shift Position Indicator Hooks
    G04948530Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the 3 hooks and then install the shift position indicator to the rear console upper panel with the 2 screws.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.