2007 Lexus LS 460LFACTORY OEM SERVICE PROCEDURE

Problem Symptoms Table

HINT:

  • Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • The electrical equipment operation may be limited by the load control of electric power control system. Follow the HOW TO PROCEED WITH TROUBLESHOOTING procedures.

Power steering system: 

POWER STEERING SYSTEM

Symptom Suspected Area See
Steering is heavy. Front tires (Improperly inflated, unevenly worn) FRONT WHEEL ALIGNMENT
Front wheel alignment (Incorrect) FRONT WHEEL ALIGNMENT
Front suspension ON-VEHICLE INSPECTION
Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Steering column assembly (w/ VGRS) REMOVAL
Steering column assembly (w/o VGRS) REMOVAL
Battery and power source system DIAGNOSIS SYSTEM 
Power source voltage of power steering ECU TERMINALS OF ECU 
Power steering converter assembly DC / DC CONVERTER 
Power steering ECU TERMINALS OF ECU 
Vehicle CONDITION (THE STEERING WHEEL IS TURNED FROM LEFT TO RIGHT REPEATEDLY WITH THE VEHICLE STOPPED OR A HEAVY LOAD IS CONTINUOUSLY APPLIED TO THE VEHICLE) DIAGNOSIS SYSTEM 
Steering effort differs between right and left or is uneven. Power steering ECU (Steering center point is not recorded correctly) TERMINALS OF ECU
Front tires (Improperly inflated, unevenly worn) FRONT WHEEL ALIGNMENT
Front wheel alignment (Incorrect) FRONT WHEEL ALIGNMENT
Front suspension ON-VEHICLE INSPECTION
Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Steering column assembly (w/ VGRS) REMOVAL
Steering column assembly (w/o VGRS) REMOVAL
Power steering ECU TERMINALS OF ECU 
While driving, steering effort does not change in accordance with vehicle speed, or the steering wheel does not return to its centered position easily. Speed sensor REMOVAL
Skid control ECU TERMINALS OF ECU
Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Power steering ECU TERMINALS OF ECU 
Friction sounds occur when turning steering wheel during low speed driving. Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Power steering ECU TERMINALS OF ECU 
PS warning light remains on. Ps warning light remains on PS WARNING LIGHT REMAINS ON 
A knocking (or cranking) sound occurs when turning the steering wheel back and forth while power steering is in operation. Front suspension ON-VEHICLE INSPECTION
Steering intermediate shaft -
Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Noise occurs when turning the steering wheel during low speed driving. Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Steering column assembly (w/ VGRS) REMOVAL
Steering column assembly (w/o VGRS) REMOVAL
High-pitched sound (squeaking) occurs when turning the steering wheel slowly with the vehicle stopped. Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Steering wheel vibrates and noise occurs when turning the steering wheel from lock to lock. Power steering gear assembly (w/ VGRS) STEERING GEAR (w/ VGRS) 
Power steering gear assembly (w/o VGRS) STEERING GEAR (w/o VGRS) 
Steering column assembly (w/ VGRS) REMOVAL
Steering column assembly (w/o VGRS) REMOVAL
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.