Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Service Data
Brake Pedal
| Brake pedal height from tibia pad BR-23 | 144.2 to 154.2 mm (5.68 to 6.07 in.) |
| Stop light switch protrusion BR-23 | 1.5 to 2.6 mm (0.059 to 0.102 in.) |
| Brake pedal free play BR-24 | 1.0 to 2.0 mm (0.039 to 0.079 in.) |
| Brake pedal reserve distance from tibia pad depressing force: 200 N (20 kgf, 45.0 lbf)> BR-24 | More than 95 mm (3.74 in.) |
Brake Master Cylinder
| Item | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| Brake fluid level warning switch BR-38 | 1-2 | Float up (Switch OFF) | 1.84 to 2.16 kΩ |
| Float down (Switch ON) | Below 1 Ω |
| Master cylinder push rod clevis length BR-45 | 122.1 to 123.1 mm (4.807 to 4.846 in.) |
| Hose clip position from the reservoir connector BR-46 | 4.0 to 7.0 mm (0.158 to 0.276 in.) |
Front Brake
| Pad lining thickness BR-56 | Standard | 13.5 mm (0.532 in.) |
| Minimum | 1.0 mm (0.039 in.) | |
| Disc thickness BR-57 | Standard (13.14 inch disc) | 30.0 mm (1.181 in.) |
| Standard (14.06 inch disc) | 34.0 mm (1.339 in.) | |
| Minimum (13.14 inch disc) | 27.0 mm (1.063 in.) | |
| Minimum (14.06 inch disc) | 31.0 mm (1.221 in.) | |
| Disc runout BR-57 | Maximum | 0.04 mm (0.0016 in.) |
Front 18 inch Disc Identification
| Item | Identification mark |
|---|---|
| 18 inch disc LH BR-59 | L |
| 18 inch disc RH BR-59 | R |
Rear Brake
| Pad lining thickness BR-72 | Standard | 13.5 mm (0.532 in.) |
| Minimum | 1.0 mm (0.039 in.) | |
| Disc thickness BR-72 | Standard (12.40 inch disc) | 20.0 mm (0.787 in.) |
| Standard (13.19 inch disc) | 22.0 mm (0.866 in.) | |
| Minimum (12.40 inch disc) | 18.0 mm (0.709 in.) | |
| Minimum (13.19 inch disc) | 20.0 mm (0.887 in.) | |
| Disc runout BR-73 | Maximum | 0.04 mm (0.0016 in.) |
Rear 17 inch Disc Identification
| Item | Identification mark |
|---|---|
| 17 inch disc LH BR-75 | L |
| 17 inch disc RH BR-75 | R |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.