Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Special Service Tools
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
| Tool number (Kent-Moore No.) Tool name |
Description | |
|---|---|---|
| EG17650301 (J-33984-A) Radiator cap tester adapter |
Adapting radiator cap tester to radiator cap and radiator filler neck a: 28 (1.10) dia. b: 31.4 (1.236) dia. c: 41.3 (1.626) dia. Unit: mm (in) |
|
| KV10117100 (J-36471-A) Heated oxygen sensor wrench |
Loosening or tightening heated oxygen sensors with 22 mm (0.87 in) hexagon nut | |
| KV10114400 (J-38365) Heated oxygen sensor wrench |
Loosening or tightening heated oxygen sensors a: 22 mm (0.87 in) |
|
| (J-44626) Air fuel ratio (A/F) sensor wrench |
Loosening or tightening air fuel ratio (A/F) sensor 1 | |
| (J-44321) Fuel pressure gauge kit |
Checking fuel pressure | |
| (J-44321-6) Fuel pressure adapter |
Connecting fuel pressure gauge to quick connector type fuel lines. | |
| (J-45488) Quick connector release |
Remove fuel tube quick connectors in engine room. | |
| KV109E0010 (J-46209) Break-out box |
Measuring the ECM signals with a circuit tester | |
| KV109E0080 (J-45819) Y-cable adapter |
Measuring the ECM signals with a circuit tester | |
| (J-23688) Engine coolant refractometer |
Checking concentration of ethylene glycol in engine coolant | |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.