Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Lexus LS 460LFACTORY OEM SERVICE PROCEDURE
Front Disc Brake
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
FRONT DISC BRAKE SERVICE DATA SPECIFICATIONS
| Unit: mm (in) | |||
|---|---|---|---|
| Brake model | Kiriu | ||
| Wheel size | 457 (18) | 483 (19) | |
| Brake pad | Standard thickness (new) | 11.0 (0.433) | |
| Repair limit thickness | 2.0 (0.079) | ||
| Disc rotor | Standard thickness (new) | 28.0 (1.102) | |
| Repair limit thickness | 26.0 (1.024) | ||
| Thickness variation (measured at 8 positions) | 0.015 (0.0006) | ||
| Maximum runout (with it attached to the vehicle) | 0.035 (0.0014) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
