WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

DTC INDEX

CONSULT-III display	Fail-safe	TIME^NOTE
No DTC is detected. further testing may be required.	-	-	-
U1000: CAN COMM CIRCUIT	x	CRNT	1 - 39
B2098: IGN RELAY ON	x	CRNT	1 - 39
B2099: IGN RELAY OFF	-	CRNT	1 - 39
B2108: STRG LCK RELAY ON	-	CRNT	1 - 39
B2109: STRG LCK RELAY OFF	-	CRNT	1 - 39
B210A: STRG LCK STATE SW	-	CRNT	1 - 39
B210B: START CONT RLY ON	-	CRNT	1 - 39
B210C: START CONT RLY OFF	-	CRNT	1 - 39
B210D: STARTER RELAY ON	-	CRNT	1 - 39
B210E: STARTER RELAY OFF	-	CRNT	1 - 39
B210F: INTRLCK/PNP SW ON	-	CRNT	1 - 39
B2110: INTRLCK/PNP SW OFF	-	CRNT	1 - 39
NOTE: The details of TIME display are as follows. CRNT: The malfunctions that are detected now 1 - 39: The number is indicated when it is normal at present and a malfunction was detected in the past. It increases like 0 → 1 → 2 ... 38 → 39 after returning to the normal condition whenever IGN OFF → ON. It is fixed to 39 until the self-diagnosis results are erased if it is over 39. It returns to 0 when a malfunction is detected again in the process.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

DTC Index

Use the Manual With the Right Hardware

When to See a Mechanic