2007 Lexus LS 460LFACTORY OEM SERVICE PROCEDURE

Physical Values

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS REFERENCE

Terminal No. (Wire color) Description Condition Value (Approx.)
(+) (-) Signal name Input/Output
1 (W/B) Ground Battery power supply Input Ignition switch OFF Battery voltage
2 (R/Y) Ground Battery power supply output Output Ignition switch OFF Battery voltage
3 (L/W) Ground Ignition power supply output Output Ignition switch ON Battery voltage
4 (P/W) Ground Interior room lamp power supply Output After passing the interior room lamp battery saver operation time 0V
Any other time after passing the interior room lamp battery saver operation time Battery voltage
5 (G) Ground Front door RH UNLOCK Output Front door RH UNLOCK (actuator is activated) Battery voltage
Other than UNLOCK (actuator is not activated) 0V
7 (R/W) Ground Step lamp Output Step lamp ON 0V
OFF Battery voltage
8 (V) Ground All doors LOCK Output All doors LOCK (actuator is activated) Battery voltage
Other than LOCK (actuator is not activated) 0V
9 (L) Ground Front door LH UNLOCK Output Front door LH UNLOCK (actuator is activated) Battery voltage
Other than UNLOCK (actuator is not activated) 0V
10 (G) Ground Rear door RH and rear door LH UNLOCK Output Rear door RH and rear door LH UNLOCK (actuator is activated) Battery voltage
Other than UNLOCK (actuator is not activated) 0V
11 (Y/R) Ground Battery power supply Input Ignition switch OFF Battery voltage
13 (B) Ground Ground - Ignition switch ON 0V
14 (GR/W) Ground Engine switch (push switch) illumination ground Input Tail lamp OFF 0V
ON
NOTE: When the illumination brightening/dimming level is in the neutral position
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.