2007 Lexus LS 460LFACTORY OEM SERVICE PROCEDURE

Fuel Tank: Installation

  1. INSTALL FUEL TANK CUSHION 
    1. Install the 5 tank cushions and fuel tank protector.
      Fig 1: Identifying Tank Cushions And Tank Protector
      G04948105Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 3 tank cushions.
      Fig 2: Identifying Tank Cushions
      G04948104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL TANK VENT HOSE SUB-ASSEMBLY 
    1. Install the vent hose to the fuel tank.
      1. Align the fuel tank vent hose connector with the pipe, then push in the fuel tank vent hose connector until the retainer makes a "click" sound to install the fuel tank vent hose to the fuel tank.
        NOTE:
        • Check that there are no scratches or foreign objects around the connected part of the fuel tank vent hose connector and pipe before this procedure.
        • After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling the fuel tank vent hose connector.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.