Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Automatic Transmission Assembly: Installation
- INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY
- Inspect the torque converter clutch (see TORQUE CONVERTER AND DRIVE PLATE ).
- INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Using a vernier caliper and a straightedge, measure dimension A between the transmission and the end surface of the drive plate.
- Aligning the matchmarks on the transmission case and torque converter clutch, engage the splines of the input shaft and turbine runner.
- Engage the splines of the stator shaft and stator while turning the torque converter clutch.
HINT:
Turn the torque converter clutch approximately 180°.
- Turn the torque converter clutch and align the matchmarks on the torque converter clutch and transmission case to engage the key of the oil pump drive gear into the slot on the torque converter clutch.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.