Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Lexus LS 460FACTORY OEM SERVICE PROCEDURE
Torque Specifications
Brake Actuator
BRAKE ACTUATOR - TORQUE SPECIFICATIONS CHART
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake actuator x No. 3 brake actuator bracket | 9.3 | 95 | 82 in.*lbf |
| Brake actuator x Brake actuator bracket | 9.2 | 94 | 81 in.*lbf |
| Brake actuator x No. 4 brake actuator bracket | 18 | 184 | 13 |
| Brake actuator x Brake accumulator pump connector box | 6.0 | 61 | 53 in.*lbf |
| Brake tube flare nut (without SST) | 15 | 155 | 11 |
| Brake tube flare nut (with SST) | 14 | 145 | 10 |
| No. 5 brake actuator bracket x Body | 11 | 112 | 8 |
| Brake actuator and brake accumulator pump assembly bolt | 20 | 204 | 15 |
| Brake actuator and brake accumulator pump assembly nut |
Front Speed Sensor
FRONT SPEED SENSOR - TORQUE SPECIFICATIONS CHART
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Skid control sensor wire clamp bolt | 8.5 | 87 | 75 in.*lbf |
Rear speed sensor
REAR SPEED SENSOR - TORQUE SPECIFICATIONS CHART
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Rear speed sensor bolt | 8.5 | 87 | 75 in.*lbf |
| Skid control sensor wire clamp bolt | |||
| Skid control sensor wire clamp nut | 5.5 | 56 | 49 in.*lbf |
Yaw Rate Sensor
YAW RATE SENSOR - TORQUE SPECIFICATIONS CHART
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Yaw rate sensor bolt | 9.0 | 92 | 80 in.*lbf |
Skid Control ECU
SKID CONTROL ECU - TORQUE SPECIFICATIONS CHART
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Skid control ECU bracket bolt | 8.5 | 87 | 75 in.*lbf |
| Skid control ECU bracket nut | |||
| Skid control ECU bolt | |||
| Skid control ECU nut |
Brake Control Power Supply
BRAKE CONTROL POWER SUPPLY - TORQUE SPECIFICATIONS CHART
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake control power supply assembly x No. 1 brake control power supply bracket | 8.5 | 87 | 75 in.*lbf |
| Brake control power supply assembly x Body | 8.0 | 82 | 71 in.*lbf |
Brake Pedal Stroke Sensor
BRAKE PEDAL STROKE SENSOR - TORQUE SPECIFICATIONS CHART
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Brake pedal stroke sensor bolt | 8.5 | 87 | 75 in.*lbf |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.