WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

COMMERCIAL SERVICE TOOLS REFERENCE

Tool name (Kent-Moore No.)		Description
(J-45488) Quick connector release	Courtesy of NISSAN MOTOR CO., U.S.A.	Removes fuel tube quick connectors in engine room
Leakage detector i.e.: (J-41416)	Courtesy of NISSAN MOTOR CO., U.S.A.	Locates the EVAP leakage
EVAP service port adapter i.e.: (J-41413-OBD)	Courtesy of NISSAN MOTOR CO., U.S.A.	Applies positive pressure via the EVAP service port
Fuel filler cap adapter i.e.: (MLR-8382)	Courtesy of NISSAN MOTOR CO., U.S.A.	Checks fuel tank vacuum relief valve opening pressure
Socket wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Removes and installs engine coolant temperature sensor
Oxygen sensor thread cleaner i.e.: (J-43897-18) (J-43897-12)	Courtesy of NISSAN MOTOR CO., U.S.A.	Reconditions the exhaust system threads before installing a new oxygen sensor. Use with anti-seize lubricant shown below. 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor
Anti-seize lubricant i.e.: (Permatex™ 133AR or equivalent meeting MIL specification MIL-A-907)	Courtesy of NISSAN MOTOR CO., U.S.A.	Lubricates oxygen sensor thread cleaning tool when reconditioning exhaust system threads.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply: