2007 Lexus LS 460FACTORY OEM SERVICE PROCEDURE

Engine Control System - Service Information & Circuit Tests: ECM: Installation

  1. INSTALL ECM 
    1. Install the ECM with the 2 nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the 6 ECM connectors.
      Fig 1: Locating ECM Connectors And Nuts
      G04943043Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL TCM 
    1. Install the TCM with the 2 nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the 4 TCM connectors.
      Fig 2: Locating TCM Connectors And Nuts
      G04943042Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL ENGINE ROOM ECU COVER 
    1. Install the engine room ECU cover with the 3 bolts.

      Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf) 

      Fig 3: Locating Engine Room ECU Cover Bolts
      G04943041Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
  5. INSTALL AIR CLEANER INLET COVER (See  INSTALLATION   ) 
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  8. PERFORM RESET MEMORY 
    NOTE: Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (see PRECAUTION ).

    HINT:

    Initialization cannot be completed by only removing the battery.

  9. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.