Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

INSTALL BRACKET
1. Install the bracket to the fuel filter.
  
  Fig 1: Identifying Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP ASSEMBLY
1. Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.
  
  Fig 2: Identifying O-Ring And Spacer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve and fuel pressure regulator.
  
  Fig 3: Locating O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the fuel main valve and fuel pressure regulator to the fuel filter.
  
  Fig 4: Identifying Fuel Main Valve And Fuel Pressure Regulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the 2 claws of the fuel filter and install the cap.
  NOTE:
  - Make sure that the fuel main valve and fuel pressure regulator is not installed backwards. If installed backwards, the engine may stall.
  - Make sure the O-rings are not cut or pinched during the installation.
  - Attach the claws securely.
5. Engage the 5 claws on the fuel filter and install the fuel pump with pump filter.
  
  Fig 5: Installing Fuel Pump With Pump Filter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Fuel Pump: Reassembly