Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Lexus LS 460FACTORY OEM SERVICE PROCEDURE
1UR-FSE Lubrication: Lubricant
LUBRICANT CAPACITY CHART
| Item | Capacity | Classification |
|---|---|---|
| Engine oil | - | ILSAC multigrade engine oil |
| Drain and refill w/ Oil filter change | 8.6 litters (9.1 US qts, 7.6 imp. qts) | 0W-20 |
| Drain and refill w/o Oil filter change | 8.4 litters (8.9 US qts, 7.4 imp. qts) | 5W-20 |
| Dry fill | 10.2 litters (10.8 US qts, 9.0 imp. qts) | (0W-20 is best choice for fuel economy and good starting in cold weather.) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.