CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM (REFERENCE)

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the intelligent tester or Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the tester on.
Enter the following menus:
1. Intelligent tester - Select: CUSTOMIZE /
2. Techstream - Select: Customize Setting /

Select the setting by referring to the table below.

Intelligent tester

SMART

SMART REFERENCE

Display	Default	Contents	Setting
IGNITION AREA	ALL	Function to choose the available area for key to start engine and cancel the steering lock.	FRONT/ALL

Techstream

Smart Key / Access

SMART KEY / ACCESS REFERENCE

Display	Default	Contents	Setting
Ignition Available Area	All	Function to choose the available area for key to start engine and cancel the steering lock.	Front/All

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Customize Parameters