2007 Lexus IS 350FACTORY OEM SERVICE PROCEDURE

Shift Lever Assembly: Reassembly

  1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY 
    1. Install the shift lock control ECU sub-assembly with the 2 screws.
      Fig 1: Identifying Shift Lock Control ECU Sub-Assembly
      G05317036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL TRANSMISSION CONTROL SWITCH 
    1. Install the shift lever with the pin and shift lever nut.
      Fig 2: Identifying Shift Lever With Pin And Shift Lever Nut
      G05317037Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.
      Fig 3: Identifying MP Grease To Hatched Area Of Shift Lever Guide Housing
      G05317038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the transmission control switch to the shift lever guide housing.
      NOTE: Securely engage the claws.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.