2007 Lexus IS 350FACTORY OEM SERVICE PROCEDURE

Shift Lever Assembly: Disassembly

  1. REMOVE SHIFT POSITION INDICATOR 
    1. Remove the 4 screws and shift position indicator.
      Fig 1: Identifying Shift Position Indicator Screws
      G05317028Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE TRANSMISSION CONTROL SWITCH 
    1. Remove the transmission control switch connector from the floor shift assembly.
      Fig 2: Identifying Transmission Control Switch Connector
      G05317029Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the shift lever support and lock pin from the floor shift assembly.
    3. Remove the shift lever guide housing from the floor shift assembly.
      NOTE: First remove the shift lever nut and lock pin, then disengage the 2 claws.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.