2007 Lexus IS 350FACTORY OEM SERVICE PROCEDURE

Torque Specifications

LIGHTING - TORQUE SPECIFICATIONS

Part tightened N*m kgf*cm ft.*lbf
HIGH INTENSITY DISCHARGE HEADLIGHT BULB      
Washer hose x Body 5.5 56 49 in.*lbf
GLOVE BOX LIGHT      
Passenger side knee airbag assembly x Body 10 102 7
HEADLIGHT DIMMER SWITCH      
Steering wheel assembly x Steering column assembly 50 510 37
Steering pad x Steering wheel assembly 8.8 90 78 in.*lbf
DOOR MIRROR FOOT LIGHT      
Outer rear view mirror assembly x Front door 5.5 56 49
STOP LIGHT SWITCH      
Stop light switch assembly x Brake pedal support assembly 17 170 12
Driver side knee airbag assembly x Body 10 102 7
FRONT DOOR COURTESY SWITCH      
Front door courtesy switch assembly x Body 8.0 82 71 in.*lbf
REAR DOOR COURTESY SWITCH      
Rear door courtesy switch assembly x Body 8.0 82 71 in.*lbf
HEIGHT CONTROL SENSOR      
Front height control sensor subassembly x Body (Bolt) 14 143 10
Front height control sensor subassembly x Body (Nut) 5.4 55 48 in.*lbf
Rear height control sensor subassembly x Body (Bolt) 14 143 10
Rear height control sensor subassembly x Body (Nut) 5.4 55 48 in.*lbf
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.